Braun Clean and Renew Electric Shaver Cleaning Cartridges, Hygienically Cleans, Removing Residual Hair & Skin Particles, 5+1 Pack, Lemon Fresh

Product Information

I concur with your finding that the ShaverMax leaves the shaver-head still wet long after the (Braun) cleaning station drying cycle, even more than a day after! The drop in performance will actually be very gradual and you probably won’t be able to pinpoint a specific moment. I worked out the strongest isopropyl alcohol that can be used, if it is too weak it wont evaporate off dry by the next use and if too strong my series 9 cleaning station shows empty.

But ask one of the seller he said u can use the same bottle wether Panasonic or Braun in both razors. First of all, thank you so very much for all of the work you’ve put into all these guides, I used them to finally make the decision and purchase the lv-97.

In fact, the instructions on the bottle only mention rinsing the shaving head in a container filled with their fluid. And due to the fact that the flow of water will directly wash the filter zone, its purity will also improve. I didn’t try that particular brand, however, I did use something similar that is quite popular here in Europe. I have found that alcohol is useful in cleaning plastics and cleaning cuts received when replacing rubber rollers. Moreover, with DIY solutions, the lubricating properties of the mix are almost impossible to get right.

Whether you need to fix, build, create or learn, eHow gives you practical solutions to the problems life throws at you. It took several hours longer than the original solution for almost all of the moisture to evaporate.In particular, if you try to add it directly to the station’s tank, it will definitely damage the plastic before it dissolves. I also find Lectric Shave to have a very oily texture that leaves a residue on my skin — I definitely wouldn’t want that on my shaver. Most chemicals that can serve this purpose or dissolve mineral oils are not available (unless you are a chemical business owner).

And in the case of most Braun electric shavers, the station is a necessary evil since the shaving heads (cassettes) can become difficult to clean manually. Difference between SD – Alcohol 40 – B which Braun is using and casual denatured alcohol is that Braun’s one is good to use in cosmetics and can come in touch with the skin.Your resource has transformed a simple interest into a passion for these technological things, a passion that my wallet pretty feals (I’ll send you an invoice, lol).

Glycerin is usually a safe addition, but a little goes a long way (I wouldn’t add more than 1 teaspoon). I can strongly recommend these refills as a (significantly) more cost-effective alternative to Braun’s cleaning solution, especially if you live in the USA. And you can lower the costs even more with just 3 easy steps that will make the cleaning solution last a lot longer. These stations take into account the fluid level and its electric conductivity as well, so there may be something wrong with the electronics involved in this process.However, there is no particular desire to use the Panasonic station on an ongoing basis, their razors are really very easy to clean by hand. Where the shaver drive pins (there are four of them, two center that drive the inner two cutter slides and two outer that drive the cutter block slides under the outer foil portions of the cutter head/cassette assembly) engage the outer cutter block slides there is a small, gray rubber dampener(? For the end user, it would be nearly impossible to make an all-in-one solution from scratch that cleans and lubricates in the same way the original does. My understanding is that the essential oils are more natural, and likely safer than food grade mineral oil.