Evolution Power Tools 067-0001 FURY6 210 mm TCT Multipurpose Table/Mitre Saw,Silver/Green

Product Information

I have loads of tools but I don't have a table saw for ripping sheet timber and thought something like this might be a useful addition to my tool collection

Multi-Material Cutting: No more need for multiple saws. With the FURY6’s multi-material cutting technology, one blade suffices for a range of materials. From wood to metal*, achieve clean, precise cuts with ease.Operate the switch to turn on the machines motor. Release the switch to turn off the machines motor. Note: The left hand side of the fence is provided with additional adjustments. The upper portion of the fence can slide to the left to provide clearance for the blade. This may be necessary when acute bevel angles are selected.

WARNING: When using this machine, dust particles may be produced. In some instances, depending on the materials you are working with, this dust can be particularly harmful. away from the blade). Pictograms on the machines rotary table are provided as an aid to safe working practices. Keep hands away from the path of the blade. After each use the machine should be cleaned. Remove all sawdust etc from the visible parts of the machine with a vacuum cleaner. A vacuum cleaner can also be connected to the machine dust extraction port at the rear of the machine. This should remove debris from the inside of the machine. Never use solvents to clean plastic parts, as solvents can damage them. Clean only with a soft slightly damp cloth. Hybrid Table/Mitre Saw Design: The FURY6 stands out with its convertible design. Switch between a table saw and mitre saw seamlessly, adapting to your project’s needs. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.Clear everything except the workpiece and related support devices away from the blade before commencing operations. If the table insert becomes damaged or worn it must be replaced with an identical one available from the manufacturer The Angle Plate can now be slid into the Rip Fence channel found at the front of the machine table. (Fig. 20)

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or key left attached to a rotating part of a power tool may result in personal injury .Note:When permanently mounting the Fury6 we recommend that the four (4) rubber feet located underneath each of the mounting holes are removed and stored safely for possible future use. General Power Tool Safety Warnings [Power tool use and care]. a) Do not force the power tool. Use the correct power tool for your application.